Cogetherm M

Cogetherm M

0.00

Manufactured from a paper comprising flakes of muscovite mica, which is impregnated with resin and agglomerated to form a laminate.

Add To Cart

Manufactured from a paper comprising flakes of muscovite mica, which is impregnated with resin and agglomerated to form a laminate.

Cogetherm M Advantages

Cogetherm M is a board designed for use under very stringent conditions. Excellent resistance to heat and even to open flames, low thermal conductivity, excellent electrical insulation, good mechanical resistance and it is impervious to most chemical substances, in particular oil and grease.

Cogetherm M Product Downloads

Cogetherm M Physical Properties

  • Size - 48" X 40" sheet in thicknesses up to 3"

  • Operating Temp - 932º F to 1292º F (peak)

  • Compressive Strength (ISO 604) - 36,250 psi @ 392º F 54,375 psi @ 68º F after one hour at 752º F 54,375 psi @ 68º F after one hour at 1112º F

  • Thermal Conductivity (btu/hr/ft²/ºF) - 1.73

  • Dielectric Strength (IEC 243) - 625 V/mil @ 68º F 325 V/mil after one hour at 752º F 250 V/mil after one hour at 1112º F


Cogetherm is a registered trademark of Cogebi

Product data provided is not a complete set of specifications for this product. A complete set of specifications is available upon request. Any purchase or use of this product without such a request, provision and reading of the complete specifications, product data and instructions for use is at the customer’s own risk. Red Seal Electric disclaims all warranties, express or implied, including, but not limited to, the warranty of merchantability and the warranty of fitness for a particular purpose. 06/97