Glastherm HT200

Glastherm HT200

0.00

A thermal insulating sheet with superior strength and heat resistance for applications with continuous use temperatures up to 550º F.

Add To Cart

A thermal insulating sheet with superior strength and heat resistance for applications with continuous use temperatures up to 550º F.

The installation or upgrading of mold base or press platen insulation is one of the highest-returning investments a molding operation can make today. Properly insulated molds require less energy to operate. Adequate insulation also facilitates temperature regulation within the tool.

Glastherm® thermal insulating sheet is an excellent choice for mold insulation applications. Glastherm® sheet offers significant advantages when compared with other materials such as mica, asbestos concrete or calcium silicate. Glastherm® sheet is an efficient thermal barrier and is strong to resist the effects of molding pressure and rough handling. It is resistant to oil and water absorption and is completely asbestos-free.

Glastherm HT200 Product Downloads

Glastherm HT200 Physical Properties

  • Size - 3' X 6' and 4' X 8' sheets in thicknesses from 1/4" to 1"

  • Thickness Tolerance - +/- .002 in

  • Density - 123 pcf

  • Operating Temp - 550º F

  • Compressive Strength (ASTM D-695) - 49,000 psi @ 75º F 18,000 psi @ 392º F 17,500 psi @ 425º F

  • Electrical Strength Perpendicular (@ 0.5 in) - 50 Vpm

  • Thermal Conductivity (btu/hr/ft²/in/ºF) - 1.90

  • Thermal Elasticity (rubber band equiv/mm) - 6.789


Glastherm is a registered trademark of The Glastic Corporation

Product data provided is not a complete set of specifications for this product. A complete set of specifications is available upon request. Any purchase or use of this product without such a request, provision and reading of the complete specifications, product data and instructions for use is at the customers own risk. Red Seal Electric disclaims all warranties, express or implied, including, but not limited to, the warranty of merchantability and the warranty of fitness for a particular purpose. 06/97